Shimano Icetoolz 67R3 cable guide set with magnet for internal transit

Suitable for hole diameter up to 6 mm
Including adapter for the implementation of Shimano Di2 (EW-DS300-I) cable

ICETOOLZ Cable guidance set with magnet
This Icetoolz Internal Routing Tool is a set of cable guides for the racing bike or ATB. The cables are easily guided through the frame with these cable guides. This cable conductor set is for the outer cable, DI2 cable and also has an extra cable handler that can pick up any cable from the frame. This cable guide fits through holes of 6mm. The ICETOOLZ item number of this cable guide is 67R3.

ICETOOLZ CABLE COLDER TOOL for Internal Routing for Race, but also for electric bicycle
Getting cables through a frame is a job separate and certainly with a carbon frame. That is already for outdoor cables, but a DI2 cable or other power cable can be controlled completely poorly through the frame. With this Icetoolz cable handlebar set, sending a cable is a piece of cake. This internal routing tool saves a lot of time and frustration. In the case of the outer cable, the cable guide is turned one end in the outer cable and then pushed the other end through the frame. The moment it is estimated that the cable guide is in the right place, the cable guide with the strong magnet from this cable guide set can be stuck and immediately lifted out of the frame at the exit. In the event of a DI2 or other power cable, the end of the DI2 cable is put into the sleeve of the cable guide and furthermore the cable guide can follow the same route through the frame as described above. The supplied adapter is especially for Shiman EW-DS300-I wire. The third cable guide is a general rescue line. The magnet at the end can pick up a lost cable.